Fireye ed510 manual

To install the ED display module using the remote mounting kit (, -2 and -3): 1. Cut an opening in the front panel face inch es square ( mm). The width of the panel face cannot exceed 5/" 2. Slide the gasket over the rear side of the display. 3. Insert the ED display and gasket through the panel opening. www.doorway.ru Size: KB. an alarm circuit and displays the cause of lockout on the integrated LED’s and on the optional ED display. Manual reset is required. Remote reset is available on the MECR, MECRC and MEC chassis. A detailed description of the various programmer, amplifier and chassis modules is found later in this document. The ED Display Module is designed to operate with the Flame-Monitor Burner Management Control System using the EP and EPD style programmer modules. The ED display is optional for EPD programmers, but is required for the EP style programmers.5/5(1).

® GENERAL OPERATION The ED displays current burner status, first out annunciation in the event of a lockout condition, historical burner information, detailed lockout information of the last six (6) lockout conditions, diagnostic messages, and the ability to program messages associated with the E Expansion Mod- ule. The display module (ED), if required, must be ordered separately. Interchangeable programmer and flame amplifier modules allow for complete versatility in selection of control function, timing, and flame scanning means. Functions such as pre-pu rge, recycling interlocks, high fire proving inter-. The ED Display Module is designed to operate with the FLAME-MONITOR Burner Manage- ment Control System using the EP and EPD style (remote mount only for EPD style) programmer modules as well as the MicroM series of controls.

The Fireye MicroM Series Flame Safeguard Control is a compact, they can be manually set through the use of the optional ED display. In this video Industrial Equipment Co. of Houston demonstrates Testing of the M, MII, or MicroM series which is done on the same tester. The display module (ED), if required, must be ordered separately. 1 ® DESCRIPTION The Fireye® E FLAME-MONITOR™ System is a microprocessor based burner.